HVAC-HEATING/AC/REFRIGERATION

HVAC 1105. Introduction to Fundamentals of Refrigeration

4 Credits (3+2P)

Demonstrate the ability to perform HVAC/R Technician duties in a safe manner. Accurately perform HVAC/R related calculations and interpret results for the purpose of diagnosis, repair, or installation of HVAC/R equipment and systems. Professionally communicate in oral and written forms. Demonstrate the use of current industry techniques including tools, testing equipment, manufacturers’ apps. Determine the appropriate ethical action that should occur in a given circumstance. Work effectively in a team-based environment. Possess a mastery of the refrigeration cycle and its components.

Learning Outcomes
  1. Demonstrate working knowledge of heat theory, safety, and temperature/pressure/volume gas laws as they relate to the refrigeration cycle.
  2. Identify and demonstrate heat transfer by conduction, convection, and radiation and describe their effects on temperature change using latent and sensible heat transfer.
  3. Safely demonstrate the refrigeration process using system components such as compressors, condensers, evaporators, metering (expansion) devices and accessories.
  4. Demonstrate a knowledge of industry standards for system installation of equipment and tubing and safely demonstrate tubing operations including cutting, reaming, flaring, swaging, and brazing.

View Learning Outcomes

HVAC 1110. Introduction to Fundamentals of Electricity

4 Credits (3+2P)

Introduces the student to electrical theory, generation and distribution, OHM's Law, series and parallel circuits, A/C / D/C, practical applications and electrical safety.

Learning Outcomes
  1. Demonstrate the use of industry practices: safety, use of lockout/tagout, diagnosing , repairing, and installing electrical components in HVAC/R equipment and systems; use of test instruments both digital and analog, comprehension of wiring diagrams, proper use of tools specific to the industry, mastery of electrical theory and circuits, single-phase and three-phase applications; use of symbols and terminology, and the ability to communicate professionally in oral and written forms.

View Learning Outcomes

HVAC 1111. EPA Clean Air Act: Section 608

1 Credit (1)

Refrigerant certification preparation to include basics of refrigerant bearing equipment, ozone depletion and the new legislation, technician categories covered and the certification examination.

Learning Outcomes
  1. Use oral communication effectively, use written communication effectively.
  2. Accurately perform calculations related to refrigeration.
  3. Accurately perform calculations related to refrigeration.
  4. Accurately perform calculations related to air conditioning.
  5. Accurately perform conversions between various units.

View Learning Outcomes

HVAC 1125. Electrical and Mechanical Controls I

4 Credits (3+2P)

Applications of basic electrical and mechanical controls. Reading and drawing diagrams of simple refrigerating equipment. Safe use of testing equipment.

Prerequisite: HVAC 1105 and HVAC 1110, or consent of instructor.

Learning Outcomes
  1. Use oral communication and written communication effectively.
  2. Determine the appropriate ethical action that should occur in a given circumstance.
  3. Perform technician duties safely.
  4. Service refrigeration systems, repair refrigeration systems, maintain refrigeration systems.
  5. Accurately perform calculations related to refrigeration.
  6. Work effectively as a team.
  7. Troubleshoot refrigeration systems.
  8. Accurately perform conversions between various units.

View Learning Outcomes

HVAC 1233. Professional Development and Leadership

1 Credit (1)

As members and/or officers of various student professional organizations, students gain experience in leadership, team building, and community service. Students competing in Skills USA are required to register for the course. May be repeated up to 6 credits.

Learning Outcomes
  1. Professionally communicate in oral and written forms.
  2. Work effectively in a team-based environment.
  3. Demonstrate the ability to perform HVAC/R Technician duties in a safe manner.

View Learning Outcomes

HVAC 1238. Introduction to Sheet Metal Fabrication

4 Credits (3+3P)

Introduction to sheet metal fabrication to include hands-on practical laboratory applications, cutting and forming procedures, identifying types and gauges. Design and layout techniques.

Prerequisite: OETS 118 or equivalent math or consent of instructor.

Learning Outcomes
  1. Professionally communicate in oral and written forms.
  2. Demonstrate the ability to perform HVAC/R Technician duties in a safe manner.
  3. Demonstrate sheet metal design and layout techniques to fabricate ducting and associated fittings accurately.
  4. Determine the appropriate ethical action that should occur in a given circumstance.
  5. Accurately perform HVAC/R related calculations and interpret results for the purpose of diagnosis, repair, or installation of HVAC/R equipment and systems.

View Learning Outcomes

HVAC 1243. Residential Air Conditioning Systems

4 Credits (3+2P)

Applications and types of equipment used in comfort cooling. Preventive maintenance, service, and repairs common to evaporative coolers and refrigerated air conditioning systems. Air properties and psychometrics.

Prerequisite: HVAC 1125 or consent of instructor.

Learning Outcomes
  1. Use oral and written communication effectively.
  2. Work effectively as a team.
  3. Determine the appropriate ethical action that should occur in a given circumstance.
  4. Troubleshoot heating systems accurately perform conversions between various units, accurately perform calculations related to heating systems.

View Learning Outcomes

HVAC 1245. Gas Heating Furnaces

4 Credits (3+2P)

The study and application of gas furnaces including installation, operation, service, maintenance and controls. The students will learn about natural gas, and electric heating systems used for residential and/or light commercial heating systems including furnace and boiler package systems and alternative heating sources. Highlights electrical and electronic trouble shooting, service, maintenance, repair and replacement of residential and light commercial heating systems. The course will include service, maintenance and troubleshooting.

Learning Outcomes
  1. Identify the components and describe the sequence of operation of gas furnaces.
  2. Use proper procedures to troubleshoot gas furnaces.
  3. Describe and demonstrate proper procedures for conducting service calls and delivering customer service.
  4. Demonstrate the use of proper procedures for preventative maintenance of gas furnaces.
  5. Describe how gas pressure is measured, what unit of measurement is used and what is the purpose of a water manometer, gas combustion, four means of proof flame, why there is a fan-on and fan-off delay, flue gas venting systems, gas piping adjacent to the gas valve, calculate the correct orifice size, derate sea level input for altitude, calculate the correct gas pipe sizing for a one-story building with several gas appliances.

View Learning Outcomes

HVAC 1250. Heat Pump Systems

4 Credits (3+2P)

The student will acquire the knowledge to identify heat pump components, explain the sequence of operation, and develop troubleshooting skills for both mechanical and electrical issues associated with reverse cycle refrigeration systems used in comfort heating and cooling, a while utilizing the proper tools and equipment.

Learning Outcomes
  1. Professionally communicate in oral and written forms.
  2. Work effectively in a team-based environment.
  3. Accurately perform HVAC/R related calculations and interpret results for the purpose of diagnosis, repair, or installation of HVAC/R equipment and systems.
  4. Demonstrate the use of current industry techniques and equipment to diagnose HVAC/R systems and perform appropriate repairs.
  5. Demonstrate the use of current industry techniques and equipment to perform the service and maintenance of HVAC/R equipment and systems.
  6. Demonstrate the use of current industry techniques and equipment in the installation of HVAC/R equipment and systems.
  7. Determine the appropriate ethical action that should occur in each circumstance.

View Learning Outcomes

HVAC 1410. Commercial Refrigeration Systems

4 Credits (3+2P)

This course covers the installation, service, and maintenance of a wide range of refrigeration equipment, including reach-in and walk-in coolers, ice machines, ice cream machines, as well as mechanical and electrical troubleshooting of refrigeration systems. Encompassing the service and maintenance of commercial refrigeration equipment, which involves procedures for evacuation and charging, understanding electrical diagrams, and handling compressors and related accessories.

Prerequisite: HVAC 1125 or consent of instructor.

Learning Outcomes
  1. Read and interpret model numbers, nomenclature, and component capacities.
  2. Use industry techniques and equipment for diagnosing and repairing HVAC/R systems.
  3. Perform service and maintenance on HVAC/R equipment and systems.
  4. Determine ethical actions in given circumstances.
  5. Demonstrate safe HVAC/R Technician duties.
  6. Work effectively in a team-based environment.
  7. Accurately perform HVAC/R calculations and interpret results.
  8. Communicate professionally, both orally and in writing.
  9. Perform leak checks, repairs, recovery, evacuation, and recharging of refrigeration systems. 1
  10. Identify components and troubleshoot parallel refrigeration systems. 1
  11. Start up, troubleshoot, and explain Lab Systems.1
  12. Address various refrigeration accessories. 1
  13. Assemble, pipe, pressure test, and operate systems. 1
  14. Troubleshoot refrigeration defrost timer systems. 1
  15. Calculate heat gain and specify refrigeration systems. 1
  16. Understand the use of water and brines as secondary refrigerants. 1
  17. Diagnose and repair refrigerant side problems. 1
  18. Set controls for temperature regulation. 1
  19. Locate information in reference sources. 2
  20. Evaluate system performance using data. 2
  21. Size and assemble refrigeration systems to meet customer needs. 2
  22. Handle refrigerant, including recovery, recycling, and reclamation. 2
  23. Identify and troubleshoot various safety controls. 2
  24. Troubleshoot line voltage thermostats and compressor contactors. 2
  25. Diagnose and repair air side problems. 2
  26. Troubleshoot electrical problems using schematics. 2
  27. Use pressure/enthalpy charts and understand the refrigeration cycle.

View Learning Outcomes

HVAC 2098. Heating, Ventilating, Air Conditioning, and Refrigeration Field Experience

1 Credit (1)

The course will provide students with actual hands-on exposure to HVAC/R fieldwork, offering insights into the expectations of field technicians as they shadow experienced HVAC/R professionals. Students will gain practical experience through supervised training at an approved Heating, Ventilation, Air Conditioning, and Refrigeration workplace.

Learning Outcomes
  1. Effectively utilize verbal and written communication, collaborate efficiently within a team, diagnose issues in refrigeration systems, precisely execute unit conversions, accurately conduct refrigeration-related calculations, identify the ethical course of action in specific situations, safely execute technician responsibilities, provide maintenance for refrigeration systems, conduct repairs on refrigeration systems, and service refrigeration systems.

View Learning Outcomes

HVAC 2210. Commercial Air Conditioning and Heating Systems

4 Credits (3+3P)

Covers troubleshooting mechanical and electrical problems associated with HVAC equipment in commercial buildings. Includes gas, electric, and heat pump systems. HVAC 1125 or consent of instructor.

Prerequisite: HVAC 1125 or consent of instructor.

Learning Outcomes
  1. Professionally communicate in oral and written forms.
  2. Determine the appropriate ethical action that should occur in a given circumstance.
  3. Demonstrate the ability to perform HVAC/R Technician duties in a safe manner.
  4. Demonstrate the use of current industry techniques and equipment in the installation of HVAC/R equipment and systems.
  5. Demonstrate the use of current industry techniques and equipment to perform the service and maintenance of HVAC/R equipment and systems.
  6. Accurately perform HVAC/R related calculations and interpret results for the purpose of diagnosis, repair, or installation of HVAC/R equipment and systems.
  7. Demonstrate the use of current industry techniques and equipment to diagnose HVAC/R systems and perform appropriate repairs.
  8. Work effectively in a team-based environment.

View Learning Outcomes

HVAC 2990. Practicum

3 Credits (3)

Working in the field with journeymen service technicians. Develop and apply job skills.

Learning Outcomes
  1. Varies.

View Learning Outcomes

HVAC 2996. Special Topics

1-6 Credits

Topics to be announced in the Schedule of Classes. May be repeated up to 12 credits.

Learning Outcomes
  1. Varies.

View Learning Outcomes