Engineering Technology  Electronics and Computer (Information Security Technology)  Bachelor of Science in Engineering Technology
Students can fulfill the Information Security Technology Concentration requirements by completing the following four courses.
Students must complete all University degree requirements, which include: General Education requirements, Viewing a Wider World requirements, and elective credits to total at least 120 credits with 48 credits in courses numbered 300 or above. Developmental coursework will not count towards the degree requirements and/or elective credits, but may be needed in order to take the necessary English and Mathematics coursework.
Prefix  Title  Credits 

General Education  
Area I: Communications  
English Composition  Level 1  
ENGL 1110G  Composition I  4 
or ENGL 1110H  Composition I Honors  
English Composition  Level 2  3  
Professional & Technical Communication (Recommended)  3  
Oral Communication  3  
Introduction to Communication (Either Recommended)  3  
or HNRS 2175G  Introduction to Communications Honors  
Area II: Mathematics  
MATH 1511G  Calculus and Analytic Geometry I ^{1}  34 
or MATH 1435  Applications of Calculus I  
Area III/IV: Laboratory Sciences and Social/Behavioral Sciences  11  
Choose two sequences from the following for eight credits:  
AlgebraBased Physics I and AlgebraBased Physics I Lab  4  
AlgebraBased Physics II and AlgebraBased Physics II Lab  4  
Calculus Based Physics I and Calculus Based Physics I Lab  4  
Calculus Based Physics II and Calculus Based Physics II Lab  4  
Area IV: Social/Behavioral Sciences Course (3 credits) ^{2}  
Area V: Humanities ^{2}  3  
Area V: Creative and Fine Arts ^{2}  3  
General Education Elective  
MATH 1521G  Calculus and Analytic Geometry II ^{1}  34 
or MATH 1440  Applications of Calculus II  
Viewing A Wider World ^{3}  6  
Departmental/College Requirements  
E T 182  Digital Logic  3 
E T 190  Applied Circuits  4 
E T 246  Electronic Devices I  4 
E T 262  Software Technology I  3 
E T 272  Electronic Devices II  4 
E T 282  Digital Electronics  4 
E T 314  Communications Systems I  3 
E T 324  Signal Processing and Filtering  4 
E T 344  Microcomputer Systems  3 
E T 362  Software Technology II  3 
E T 377  Computer Networking I  3 
E T 381  Renewable Energy Technologies  3 
E T 398  Digital Systems  3 
E T 402  Instrumentation  3 
E T 410  Senior Seminar  1 
E T 435  Senior Project  3 
E T 444  Hardware and Software Senior Design  3 
E T 456  Applied Power Technologies  4 
ENGR 100G  Introduction to Engineering  3 
I E 451  Engineering Economy  3 
Concentration Coursework  
C S 272  Introduction to Data Structures  4 
C S 478  Computer Security  3 
BCIS 482  Management of Information Security  3 
ICT 450  Ethical Hacking  3 
NonDepartmental Requirements (in addition to Gen.Ed/VWW)  
A ST 311  Statistical Applications  3 
Second Language: (not required)  
Electives, to bring the total credits to 120 ^{4}  01  
Total Credits  120121 
^{1}  For students wishing to pursue a technical master's degree, MATH 1511G Calculus and Analytic Geometry I and MATH 1521G Calculus and Analytic Geometry II are recommended and will satisfy both the Area II and General Education Elective requirements. Students who take MATH 1435 Applications of Calculus I and MATH 1440 Applications of Calculus II, will need to have an exception made for their degree audit. *students may need to take any prerequisites needed to enter the class(es) first. 
^{2}  See the General Education section of the catalog for a full list of courses 
^{3}  See the Viewing a Wider World section of the catalog for a full list of courses 
^{4}  Elective credit may vary based on Math course selection, prerequisites, dual credit, AP credit, double majors, and/or minor coursework. The amount indicated in the requirements list is the amount needed to bring the total to 120 credits and may appear in variable form based on the degree. However students may end up needing to complete more or less on a casebycase basis and students should discuss elective requirements with their advisor. 
A Suggested Plan of Study for Students
This roadmap assumes student placement in MATH 1511G Calculus and Analytic Geometry I and ENGL 1110G Composition I. The contents and order of this roadmap may vary depending on initial student placement in mathematics and English. It is only a suggested plan of study for students and is not intended as a contract. Course availability may vary from fall to spring semester and may be subject to modification or change.
First Year  

Fall  Credits  
ENGR 100G  Introduction to Engineering  3 
E T 190  Applied Circuits  4 
ENGL 1110G or ENGL 1110H 
Composition I or Composition I Honors 
4 
MATH 1511G or MATH 1435 
Calculus and Analytic Geometry I ^{1} or Applications of Calculus I 
34 
Credits  1415  
Spring  
E T 182  Digital Logic  3 
MATH 1521G or MATH 1440 
Calculus and Analytic Geometry II ^{1} or Applications of Calculus II 
34 
ENGL 2210G  Professional & Technical Communication  3 
COMM 1115G or HNRS 2175G 
Introduction to Communication or Introduction to Communications Honors 
3 
Area V: Humanities Course ^{2}  3  
Credits  1516  
Second Year  
Fall  
E T 246  Electronic Devices I  4 
E T 262  Software Technology I  3 
E T 282  Digital Electronics  4 
PHYS Sequence (Area III: Laboratory Sciences) Course ^{3}  4  
Credits  15  
Spring  
E T 362  Software Technology II  3 
E T 314  Communications Systems I  3 
E T 272  Electronic Devices II  4 
PHYS Sequence (Area III: Laboratory Sciences) Course ^{3}  4  
E T 398  Digital Systems  3 
Credits  17  
Third Year  
Fall  
Area VI: Creative and Fine Arts Course ^{2}  3  
C S 272  Introduction to Data Structures  4 
E T 324  Signal Processing and Filtering  4 
E T 377  Computer Networking I  3 
Elective Course ^{4}  1  
Credits  15  
Spring  
Area IV: Social/Behavioral Sciences Course ^{2}  3  
A ST 311  Statistical Applications  3 
BCIS 482  Management of Information Security  3 
E T 381  Renewable Energy Technologies  3 
E T 344  Microcomputer Systems  3 
Credits  15  
Fourth Year  
Fall  
E T 402  Instrumentation  3 
E T 444  Hardware and Software Senior Design  3 
ICT 450  Ethical Hacking  3 
I E 451  Engineering Economy  3 
Viewing a Wider World Course ^{5}  3  
Credits  15  
Spring  
C S 478  Computer Security  3 
E T 410  Senior Seminar  1 
E T 435  Senior Project  3 
E T 456  Applied Power Technologies  4 
Viewing A Wider World Course ^{5}  3  
Credits  14  
Total Credits  120122 
^{1}  Students may need to take any prerequisites needed to enter MATH 1511G Calculus and Analytic Geometry I/MATH 1435 Applications of Calculus I or MATH 1521G Calculus and Analytic Geometry II/MATH 1440 Applications of Calculus II before enrolling in either option of coursework. *For students wishing to pursue a technical master's degree, MATH 1511G Calculus and Analytic Geometry I and MATH 1521G Calculus and Analytic Geometry II are recommended and will satisfy both the Area II and General Education Elective requirements. Students who take MATH 1435 Applications of Calculus I and MATH 1440 Applications of Calculus II, will need to have an exception made for their degree audit. 
^{2}  See the General Education section of this catalog for a full list of courses 
^{3}  Students must select two different PHYS course sequences, from the following, in order to meet the Area III: Laboratory Sciences requirement.

^{4}  Elective credit may vary based on Math course selection, prerequisites, dual credit, AP credit, double majors, and/or minor coursework. The amount indicated in the requirements list is the amount needed to bring the total to 120 credits and may appear in variable form based on the degree. However students may end up needing to complete more or less on a casebycase basis and students should discuss elective requirements with their advisor. 
^{5}  See the Viewing a Wider World section of this catalog for a full list of courses 