Engineering Technology - Civil (Renewable Energy Technologies) - Bachelor of Science in Engineering Technology
Students must complete all university degree requirements, which include: General Education requirements, Viewing a Wider World requirements, and elective credits to total at least 123 credits with 48 credits in courses numbered 300 or above. Developmental coursework will not count towards the degree requirements and/or elective credits, but may be needed in order to take the necessary English and Mathematics coursework.
Prefix | Title | Credits |
---|---|---|
General Education | ||
Area I: Communications | ||
English Composition - Level 1 | ||
ENGL 1110G | Composition I | 4 |
English Composition - Level 2 | ||
ENGL 2210G | Professional & Technical Communication | 3 |
Oral Communication | 3 | |
Introduction to Communication | 3 | |
Area II: Mathematics | ||
MATH 1511G | Calculus and Analytic Geometry I ^{1} | 3-4 |
or MATH 1435 | Applications of Calculus I | |
Area Ill: Laboratory Sciences | 8 | |
Introduction to Chemistry Lecture and Laboratory (non majors) | 4 | |
Choose one sequence from the following for four credits: | ||
Algebra-Based Physics I and Algebra-Based Physics I Lab | 4 | |
Calculus -Based Physics I and Calculus -Based Physics I Lab | 4 | |
Area IV: Social/Behavioral Sciences ^{2} | 3 | |
Area V: Humanities ^{2} | 3 | |
Area VI: Creative and Fine Arts ^{2} | 3 | |
General Education Elective | ||
MATH 1521G | Calculus and Analytic Geometry II ^{1} | 3-4 |
or MATH 1440 | Applications of Calculus II | |
Viewing A Wider World ^{3} | 6 | |
Departmental/College Requirements | ||
E T 101 | Introduction to Engineering Technology and Geomatics | 1 |
E T 109 | Computer Drafting Fundamentals | 3 |
E T 143 | Civil/Survey Drafting I | 3 |
E T 154 | Construction Methods and Communications | 3 |
E T 254 | Concrete Technology | 3 |
E T 308 | Fluid Technology | 3 |
E T 308 L | Fluid Technology Lab | 1 |
E T 310 | Applied Strength of Materials | 3 |
E T 310 L | Applied Strength of Materials Lab | 1 |
E T 332 | Applied Design of Structures I | 4 |
E T 354 | Soil and Foundation Technology | 4 |
E T 355 | Site/Land Development and Layout | 3 |
E T 410 | Senior Seminar | 1 |
E T 412 | Highway Technology | 3 |
E T 418 | Applied Hydraulics | 3 |
E T 421 | Senior Project | 3 |
E T 432 | Applied Design of Structures II | 4 |
E T 459 | Construction Technology and Management | 3 |
SUR 222 | Introduction to Geomatics | 3 |
or DRFT 222 | Introduction to Geomatics | |
ENGR 120 | DC Circuit Analysis | 4 |
ENGR 190 | Introduction to Engineering Mathematics | 4 |
ENGR 233 | Engineering Mechanics I | 3 |
ENGR 234 | Engineering Mechanics II | 3 |
I E 451 | Engineering Economy | 3 |
A ST 311 | Statistical Applications | 3 |
Concentration Coursework | ||
E T 381 | Renewable Energy Technologies | 3 |
E T 382 | Solar Energy Technologies | 3 |
or E T 384 | Wind and Water Energy Technologies | |
E T 386 | Sustainable Construction and Green Building Design | 3 |
SUR 328 | Construction Surveying & Automation Technologies | 3 |
Second Language: (not required) | ||
Electives, to bring the total credits to 120 | 0 | |
Total Credits | 123-125 |
- ^{ 1 }
For students wishing to pursue a technical master's degree, MATH 1511G Calculus and Analytic Geometry I andMATH 1521G Calculus and Analytic Geometry II are recommended and will satisfy both the Area II and General Education Elective requirements.
Students who take MATH 1435 Applications of Calculus I and MATH 1440 Applications of Calculus II, will need to have an exception made for their degree audit.
*for either Mathematics course selection students may need to take any prerequisites needed to enter the class(es) first.
- ^{ 2 }
See the General Education section of the catalog for a full list of courses
- ^{ 3 }
See the Viewing a Wider World section of the catalog for a full list of courses
A Suggested Plan of Study for Students
This roadmap assumes student placement in MATH 1511G Calculus and Analytic Geometry I and ENGL 1110G Composition I. The contents and order of this roadmap may vary depending on initial student placement in mathematics and English. It is only a suggested plan of study for students and is not intended as a contract. Course availability may vary from fall to spring semester and may be subject to modification or change.
First Year | ||
---|---|---|
Fall | Credits | |
ENGL 1110G | Composition I | 4 |
E T 101 | Introduction to Engineering Technology and Geomatics | 1 |
E T 154 | Construction Methods and Communications | 3 |
ENGR 120 | DC Circuit Analysis | 4 |
ENGR 190 | Introduction to Engineering Mathematics | 4 |
Credits | 16 | |
Spring | ||
E T 109 | Computer Drafting Fundamentals | 3 |
MATH 1435 or MATH 1511G | Applications of Calculus I ^{1} or Calculus and Analytic Geometry I | 3-4 |
CHEM 1120G | Introduction to Chemistry Lecture and Laboratory (non majors) | 4 |
Physics I with Lab (Area III: Lab Sciences, Choose one) | 4 | |
Algebra-Based Physics I and Algebra-Based Physics I Lab | ||
Calculus -Based Physics I and Calculus -Based Physics I Lab | ||
Credits | 14-15 | |
Second Year | ||
Fall | ||
E T 143 | Civil/Survey Drafting I | 3 |
ENGR 233 | Engineering Mechanics I | 3 |
MATH 1440 or MATH 1521G | Applications of Calculus II ^{1} or Calculus and Analytic Geometry II | 3-4 |
ENGL 2210G | Professional & Technical Communication | 3 |
COMM 1115G | Introduction to Communication | 3 |
Credits | 15-16 | |
Spring | ||
E T 254 | Concrete Technology | 3 |
E T 308 | Fluid Technology | 3 |
E T 308 L | Fluid Technology Lab | 1 |
SUR 222 | Introduction to Geomatics | 3 |
ENGR 234 | Engineering Mechanics II | 3 |
Area IV: Social Behavior Sciences ^{2} | 3 | |
Credits | 16 | |
Third Year | ||
Fall | ||
E T 310 | Applied Strength of Materials | 3 |
E T 310 L | Applied Strength of Materials Lab | 1 |
E T 354 | Soil and Foundation Technology | 4 |
Viewing a Wider World ^{3} | 3 | |
Area V: Humanities ^{2} | 3 | |
Credits | 14 | |
Spring | ||
E T 332 | Applied Design of Structures I | 4 |
E T 355 | Site/Land Development and Layout | 3 |
E T 382 | Solar Energy Technologies | 3 |
SUR 328 | Construction Surveying & Automation Technologies | 3 |
Area VI: Creative and Fine Arts ^{2} | 3 | |
Credits | 16 | |
Fourth Year | ||
Fall | ||
A ST 311 | Statistical Applications | 3 |
E T 432 | Applied Design of Structures II | 4 |
E T 381 | Renewable Energy Technologies | 3 |
E T 386 | Sustainable Construction and Green Building Design | 3 |
E T 459 | Construction Technology and Management | 3 |
Credits | 16 | |
Spring | ||
I E 451 | Engineering Economy | 3 |
E T 410 | Senior Seminar | 1 |
E T 412 | Highway Technology | 3 |
E T 418 | Applied Hydraulics | 3 |
E T 421 | Senior Project | 3 |
Viewing a Wider World ^{3} | 3 | |
Credits | 16 | |
Total Credits | 123-125 |
- ^{ 1 }
Students may need to take any prerequisites needed to enter MATH 1511G Calculus and Analytic Geometry I/MATH 1435 Applications of Calculus I or MATH 1521G Calculus and Analytic Geometry II/MATH 1440 Applications of Calculus II before enrolling in either option of coursework.
*For students wishing to pursue a technical master's degree, MATH 1511G Calculus and Analytic Geometry I and MATH 1521G Calculus and Analytic Geometry II are recommended and will satisfy both the Area II and General Education Elective requirements. Students who take MATH 1435 Applications of Calculus I and MATH 1440 Applications of Calculus II, will need to have an exception made for their degree audit.
- ^{ 2 }
See the General Education section of this catalog for a full list of courses
- ^{ 3 }
See the Viewing a Wider World section of the catalog for a full list of courses